Good News! 2 units 3 axle flatbed semi trailer has finished and will be sent to the Philippines.
3 Axle Flatbed Semi Trailer For Sale
Philippines customers found us on Alibaba, talked to us and had questions about semi-trailers for a long time. From the scale of the company to the production of semi-trailers, customers must conduct strict investigations in every aspect. Because he is not only looking for a supplier, but also a long-term partner. Although this is something to be followed, the customer chose TITAN flatbed semi trailer, which is the affirmation and recognition of every aspect of TITAN.
3 Axle 20/40Ft Flatbed Semi Trailer For Sale In Philippines
The customer not only bought the 2 units 3 axle flatbed semi trailer, but also bought the service.For customers who use flatbed semi trailers for the first time, TITAN have special tutorial videos and instruction manuals. Of course TITAN also provides methods and measures to maintain semi-trailers.
1. Precautions during the inspection
Except as specified, inspections are carried out in an empty state. When lifting the wheel, the axle should be jacked up at the same time, and the jack position should be near the leaf spring.
The parts in contact with the jack should be padded with thick steel plates or thick boards to prevent local excessive force or slippage.
Package of Container Trailer Price
2. Check the brake chamber
Check whether the brake cylinder pushrod moves flexibly when the brake is working, whether it is within the specified stroke (standard working stroke is 30~35mm), if the stroke exceeds 50mm, it should be adjusted.
In the braking state, check the container trailer of the brake air chamber for air leakage, apply soapy water to the clamp, and check for air leakage. If there is air leakage, tighten the clamp clamping nut with a tightening torque of 30N.m. Check the front vent hole for air leakage. If it leaks, replaces the rubber diaphragm. Check for cracks and damage on the outside, and replace the entire brake chamber if necessary.
3. Adjustment of the brake
Operate the brake chamber, check the working status of the brake adjustment arm, and check whether the stroke of the push rod is normal. If the stroke exceeds 50mm, it means that the gap between the brake shoe friction lining and the brake drum is too large, and it should be adjusted according to the following methods.
Details of Flatbed Trailer Manufacturer
When adjusting the brake, first press down the positioning sleeve of the adjusting arm and pull the small hexagonal head shaft for adjustment to make the brake shoe friction lining completely contact the brake drum. Then reverse the small hexagonal head shaft to make the push rod stroke a specified value, and finally let the positioning sleeve return to position the small hexagonal head shaft.
Since it is difficult to ensure a consistent gap when adjusting the brakes of each wheel, the test run after the adjustment shall be subject to the braking without deviation. For detailed adjustment methods, please refer to the introduction on the axle manual.
4. Inspection and maintenance of tires
The proper tire pressure greatly affects the service life and safety of the tire, so the specified tire pressure should be maintained including the spare tire.Depending on the load, road surface and braking conditions, tire wear is also different. In order to make the tire wear uniform, the tire assembly position should be exchanged regularly (every 5,000 kilometers).
Tri Axle Flatbed Trailer
Check the tightness of the wheel nuts every day. If they are found to be loose, they should be tightened. The tightening torque is 450~500N.m.Check axles, wheels and tires for cracks, damage and deformation, repair or replace if necessary.
5. Traction pin and traction pin seat plate
Check the traction pin every day for flaws, premature wear, cracks and other defects.Measure the diameter of the traction pin, if the diameter is less than 48 or 86mm, or if there is a crack or abnormal damage, it should be replaced.
When the traction pin is changed or the traction pin is loose, the traction pin lock nut should be tightened, and the tightening torque is 1100~1300N.m.Check the traction pin seat plate for scratches, distortions and foreign objects, repair or replace if necessary.
You can download video, you can learn about different types of flatbed semi trailer,such as 2 axle flatbed semi trailer,3 axle container semi trailer,4 axle 40ft flatbed semi trailer,etc. As well as the process, testing, packaging and customer feedback, etc.
Flatbed Semi Trailers Video
This kind of semi trailer was designed with lots of advantages and features. If you want to get more information, please don't hesitate to make contact with us.
